The surveillance is mostly done on the inside of the car, not the outside. Parking sensors don’t really provide useful data for them to harvest, but that is why they cost so much to replace. If you don’t care about parking sensors you can just replace your bumper without them, the car doesn’t really care after you tell it “you didn’t ship with parking sensors”.
Are you really going to yell over someone accidentally taking the wrong ham and cheese sandwich?
Maybe after reading 30 pages of the manual it might make things clear. But IDK about you, but I don’t want to read through the owners manual for 10 different printers before buying one.
And a raspberry pi will do a hell of a lot better job at doing that than the printer.
Our brother printer at work is otherwise a fairly great printer. But dear god does it have the WORLDS WORST wifi connectivity. I had to put it directly under an AP at work so it wouldn’t try to connect to one on the other side of the office at 0.1Mbps and constantly dropping packets.
Now they’re are doing it? There is nothing new about this, this has been a thing for YEARS.
Sorry, this is an AppleTalk household.
https://en.wikipedia.org/wiki/System_X_(supercomputer)
G5
Oof, in only a couple years it was worthless.
Are you on Windows or Linux? On windows 11 go to settings > power and battery > power mode and if you set it to high performance it almost doubles the TDP of the CPU. On windows 10 click the battery and drag the slider to high performance. If what I read online is correct the T14 and the T15 are the exact same heatsink and motherboard so unless the 1" gap from the end of the heatsink to the vent is that much of a problem they should perform exactly the same, just like the later T14 and T16 models. But 4 years is more than enough time for the thermal paste to be toast. My P1 ruined it’s paste in less than 6 months, but that’s also an i9.
But that’s the world of modern Intel CPUs. Turbo boost as far as you possibly can until you can’t turbo anymore. Then in 6 months when the thermal paste is ruined you’re searching for a new machine.
Change your thermal paste. These machines (as do all modern machines) run hot, and their paste doesn’t last long if you’re a heavy user. Find a thermal paste that’s thick in particular.
The pump out effect is really drastic on these modern CPUs if you’re constantly hitting 100% load.
The only thing I’m really curious about is how far back the CPU gets throttled with the dGPU active and busy.
On both of my machines when I render a video using my GPU the CPU is still the limiting factor because of the codec I chose. On my 11th gen machine it took like 5 minutes before it was power throttled down to 25 watts. My gen 6 takes longer to power throttle and only goes down to 35 watts, but either power level that sucks. I already know the gen 7 dials back the clock speeds, but I’m mostly curious how far it goes and how quickly?
The easiest way to test this is just open a video game that’s taxing on the CPU and GPU, I don’t think the CPU throttles with light loads like if you opened furmark. Maybe benchmarking software would cause it to throttle.
Let me know how the thermals are on that machine. I ended up paying out the ass for a refurbished gen 6 because it comes with the 4090 and a MUCH bigger heatsink. From what I saw initially in the reviews the performance is worse not just because the 100 series has worse IPC, but the machine doesn’t actually boost as much since it’s more thermally limited.
HOWEVER the machine gets a LOT better battery.
My gen 4 would get anywhere between 30 minutes and 2 hours of battery life unless I’m doing literally nothing on it. This gen 6 gets like 4 hours unless I’m heavily taxing it. But from people online I saw them say 7 hours is easily doable. And having a GPU that doesn’t use 20 watts sitting idle sure helps.
Which series? T/P or one of the economy options? The T, X, W, and later on P series have been the only models people really like.
We have a few T series at work and they’re not bad. My T14 Gen. 1 doesn’t thermal throttle at all as long as its thermal paste isn’t toast. It will run at basically its full all core boost speeds all day long. The newer 12th Gen. machines dial their clocks back a smidge under full load, but that’s because they have 2x the cores of my measly 10th Gen. machine.
Also I have a T14s AMD and that thing is a BEAST for such a small machine. 35 watts out of an AMD 6 core is no slouch for something that small. And I easily get 7+ hours of battery life out of my abusive use.
They didn’t. They did kinda change the goalpost though.
Which model did you get? The i7 or the i9? The i7 models have a minimum guaranteed TDP of 28 watts, while the i9 is at least 35. But 35 watts on such a high end CPU is dire. The Gen. 7 also killed their high end GPU options, but maybe that leaves more power headroom for the CPU.
That’s still better than my P1 Gen. 4 which throttles down to 25 watts. 25 watts on an 11th Gen. i9 is AWFUL performance.
Fully autonomous (no driver needed) or is level 3 self driving enough? (tesla straddles that line)
More than just the cellular radio.
https://www.theregister.com/2023/04/27/qualcomm_covert_operating_system_claim/
I think this was built into the SOC itself, or the GPS module, but it runs 100% independently of your OS, even on custom firmware.
Taking a sip generally isn’t that distracting. But when the cup doesn’t want to go into the cup holder no matter what you do, and you have to look down to figure it out is.
I’m actually all for this. If you’re driving your #1 priority should be paying attention to the road, and any distraction should be avoided if possible.
The Germans had it right not having cup holders in their cars.
If you’ve got a thunderbolt port on your laptop and a thunderbolt dock on your laptop then there’s no reason why it shouldn’t work.
I’m not familiar with thunderbolt on linux, but on windows you plug it in and it just works™️ and shows up as if it was inside your machine. Your DE on linux might automatically do it, but if you’re command line only you’ll probably have to run a command first.
This happened with all of our work phones. It died down over time of not answering, but it still happens.
Honestly sticking with a known number is much better than trying to get something new. There’s a reason that number was available, and it’s probably because someone wanted the spam to stop.
deleted by creator