I wanted to install an extra hard drive in my computer, but the power supply didn’t have enough connectors. I actually had a spare power supply unit, but upon testing, the 24 pin cable was too short to reach the motherboard.

I ended up using both PSUs. Only one had a power switch on it, so that was connected to the hard drives. I had to use a paperclip in the unused 24 pin connector to make it output power. The 2 PSUs had a wire running between the ground pins of a random unused connector, and they were on the same phase circuit.

The hard drive PSU had to be turned on first at the switch. Once that was on, I could press the power button to turn on the computer. I think I used it for about a year before buying enough upgrade parts to effectively replace the entire computer.

I still see this every few months.

I think it’s happening if a key is released at the same time as a window opens or changes to full screen, but it’s too rare to properly troubleshoot. The fix is still the same.

You don’t need to do everything every day. Some days, surviving is enough.

I read through seeming endless logs from a battle simulation and used these log to improve the accuracy of the simulation. It may seem like tedious work not fitting of a Klingon warrior, but now our brothers and sisters will be more prepared with a fair simulation as they train FOR THE GLORY OF THE EMPIRE!

I decided to use NAND instead of NOR, but it’s effectively the same thing.

Scala:

//main
@main
def main(): Unit =
  var i = 15 //Choose any number here
  i = add(i, 1) //this increments i
  println(i)

//Adds 2 numbers in the most intuitive way
def add(a: Int, b: Int): Int =
  val pairs = split(a).zip(split(b))
  val sumCarry = pairs.scanLeft(false, false)((last, current) => fullAdder(current._1, current._2, last._2))
  return join(sumCarry.map(_._1).tail.reverse)

//Converts an integer to a list of booleans
def join(list: Seq[Boolean]): Int = Integer.parseInt(list.map(if (_) '1' else '0').mkString, 2)

//Converts a list of booleans to an integer
def split(num: Int): Seq[Boolean] = num.toBinaryString.reverse.padTo(32, '0').map(_ == '1')

//Adds 2 booleans and a carry in, returns a sum and carry out
def fullAdder (a: Boolean, b: Boolean, c: Boolean): (Boolean, Boolean) =
  (NAND(NAND(NAND(NAND(a, NAND(a, b)), NAND(NAND(a, b), b)), NAND(NAND(NAND(a, NAND(a, b)), NAND(NAND(a, b), b)), c)), NAND(NAND(NAND(NAND(a, NAND(a, b)), NAND(NAND(a, b), b)), c), c)), NAND(NAND(NAND(NAND(a, NAND(a, b)), NAND(NAND(a, b), b)), c), NAND(a, b)))

//The basis for all operations
def NAND(a: Boolean, b: Boolean): Boolean = !a || !b

try it online here