Sensors. Especially sensors in your living space where fans or other noise from the proper server would be distracting, or in a tight space - inside your HVAC, for example - where a proper server wouldn’t fit.

Media front-end. Most of those SBCs are more than enough to run a kodi or jellyfin frontend, fanless for minimum distraction.

Robot. Low power requirement so it could be mobile; but there are lots of stationary possibilities. GPIO libraries are great for running servos and there’s tons of libraries to facilitate.

This one’s not going to be close. According to his youtube channel, he’s on day 50 in Kansas. Got a Red Bull partnership and enough money for hotels & Uber for off-trek travel.

RAID is more likely to fail than a single disk. You have the chance of single-disk failure, multiplied by the number of disks, plus the chance of controller failure.

RAID 1 and RAID 5 protect against that by sharing data across multiple disks, so you can re-create a failed drive, but failure of the controller may be unrecoverable, depending on availability of new, exact-same controller. With failure of 1 disk in RAID 1, you should be able to use the array ‘degraded,’ as long as your controller still works. Depending on how the controller works, that disk may or may not be recognizable to another system without the controller.

RAID 1 disks are not just 2 copies of normal disks. Example: I use software RAID 1, and if I take one of the drives to another system, that system recognizes it as a RAID disk and creates a single-disk, degraded RAID array with it. I can mount the array, but if I try to mount the single disk directly, I get filesystem errors.