• barsoap@lemm.ee
    link
    fedilink
    English
    arrow-up
    0
    ·
    16 days ago

    When’s that going to happen? Right after the green hydrogen revolution?

    Already happening, on a small (but industrial) scale. You can buy that stuff off the shelf, but it’s still on the lower end of the sigmoid. Most new installations right now will be going to Canada and Namibia, we’ll be buying massive amounts of ammonia from both.

    Sorry, I didn’t think someone would deny the existance of dunkelflautes. It’s currently happening in Germany.

    Yes and elsewhere in Europe the wind is blowing. Differences in solar yields are seasonal (that’s what those three months storage are for, according to Fraunhofer’s initial plans), but reversed on the other side of the globe, and Germany would be better situated to tank differences in local wind production all by itself if e.g. Bavaria didn’t hinder wind projects in their state. The total energy the sun infuses into the earth does change a bit over time, but that’s negligible. In principle pretty much zero storage is needed as long as there’s good enough interconnectivity.

    …meanwhile, we’ll probably have the first commercial fusion plant in just about the mean construction time of a fission plant.

    • iii@mander.xyz
      link
      fedilink
      English
      arrow-up
      0
      ·
      16 days ago

      Already happening, on a small (but industrial) scale.

      I mean, isn’t that the problem with all storage technologies?

      Is the goal of renewables to do 90% of the year with renewables, and 10% of the year with fossil fuel?

      Hopefully one day, the last 10% is “green hydrogen”, “syngas”, “synpetrol”? That’s how the intermittancy problem is “solved”?

      • barsoap@lemm.ee
        link
        fedilink
        English
        arrow-up
        0
        ·
        16 days ago

        In essence, yes. And we need the hydrogen/ammonia/methane/methanol/whatever anyway to do chemistry with, so we’ll have to produce them in some renewable way anyway, and at scale. Using them in peaker plants is only a fraction of the total use.

        Even with fusion up and running we’re going to do hydrolysis. You can run a car on electricity, or domestic heating, also aluminium smelting, but not a blast furnace to reduce steel nor a chemical industry. Hydrogen, in one form or another, is the answer to all of those things. As things currently stand the market is in its infancy but the first pipelines are getting dedicated to hydrogen, the first blast furnaces made for operation with hydrogen are up and running… and the hydrogen mostly comes from fossil gas. It’s a bit of a chicken and egg problem you need demand to have supply but you need supply to have demand, so kick-starting the demand side by supplying it fossil hydrogen makes a lot of economical sense, that means that the supply investments can go big and be sure that they’ll have customers from day one.

        • iii@mander.xyz
          link
          fedilink
          English
          arrow-up
          0
          ·
          16 days ago

          Hydrogen, in one form or another, is the answer to all of those things

          No it isn’t? What makes steel steel is the carbon inbetween Fe.

          Green hydrogen has been promised to me my whole life. Sad to day I now understand your point of view. Natural gas wins.

          • barsoap@lemm.ee
            link
            fedilink
            English
            arrow-up
            0
            ·
            edit-2
            16 days ago

            What makes iron is the lack of O in Fe3O4 (that’s magnetite, other ores are similar). Carbon for alloying is not an issue it can be easily covered by biomass, you smelt the magnetite by combining it with hydrogen resulting in iron and (very hot) water, no carbon involved, then you add carbon, something like 2% thereabouts, to get steel. Add too much and you get cast iron. The overwhelming majority of coke used in the coke process is not used for alloying, but smelting and reducing the iron. That part of the steel making process is completely decarbonised in the hydrogen process, and the carbon that’s used in alloying, well, it’s not in the atmosphere is it.

            You can rip the oxygen off iron ore with electricity but that’s less energy-efficient than taking a detour via electrolysis. It’s different with aluminium, there using electricity directly is more efficient.

            Sad to day I now understand your point of view. Natural gas wins.

            If you think that’s what I’m saying then no, you don’t understand my POV.

              • barsoap@lemm.ee
                link
                fedilink
                English
                arrow-up
                0
                ·
                edit-2
                16 days ago

                OMG yes I said “blast furnace to reduce steel”. I meant “to reduce iron [to produce steel]”. Obviously: What else would you use hydrogen for in a blast furnace?

                But “reduce steel” is still, at least colloquially, correct for recycling steel: Scrap has rust on it so it also needs to be reduced. Which you would’ve realised instead of trying to turn this into a silly gotcha if you knew what you were talking about.

                Go ahead, do tell me about your plan on how to produce steel, from ore, without getting fossil fuels or hydrogen involved. Charcoal? Could work, but I don’t think the economics make sense.