• nycki@lemmy.worldOP
    link
    fedilink
    English
    arrow-up
    11
    ·
    edit-2
    11 days ago

    if anyone’s curious: that’s a ps4 controller with a gold buttons mod from eXtremeRate and a usb-c mod from Casual Coders on Tindie, along with some ps4 controller cell phone mount from amazon.

    I use a 6-inch usb-c cable to connect the controller to my phone, and it registers with Retroarch Android, which is running a simulation of VirtualBoy Bowling. In the emulator settings you can enable red/blue anaglyph mode, which works with these paper 3D glasses.

    • HEXN3T@lemmy.blahaj.zone
      link
      fedilink
      arrow-up
      6
      ·
      11 days ago

      Is it better or worse than an actual VirtualBoy (it’s incredibly common for someone to just have one lying around, of course)

      • nycki@lemmy.worldOP
        link
        fedilink
        English
        arrow-up
        4
        ·
        11 days ago

        I couldn’t say. From what I’ve heard, slightly worse; I think people prefer not having the red-blue-fighting thing in their eyes. The best way to play virtualboy right now is on a hacked 3DS with its glasses-less 3D display.

        If you have one you should try it out; its suprisingly easy to hack, or rather, the hack process is surprisingly well-documented!

    • Draconic NEO@lemmy.dbzer0.com
      link
      fedilink
      arrow-up
      2
      ·
      9 days ago

      I didn’t even know you could get a USB C mod for the PS4 controller. I just bought a dualsense controller for the games on PC I needed motion controls in (can’t use an Xbox gamepad in those) since it uses USB C and I didn’t want to buy a controller I couldn’t charge with my other cables.

      • nycki@lemmy.worldOP
        link
        fedilink
        English
        arrow-up
        1
        ·
        edit-2
        8 days ago

        I have both, and I prefer the Dualsense for its larger touchpad and less intrusive light bar, but the Dualshock is lighter which is nice for this setup.

        The usb-c mod is easy to install, in theory; you just disconnect a single ribbon cable and swap out the entire pcb with the port on it. The harder part of the mod is carving a hole in the plastic, since usb-c ports are wider than micro ports.

        I think eXtremeRate now sells a back shell with the usb-c hole already cut!